17-7 Steel Strip, Coil, Foil, Wire, AMS 5528 (CONDA), AMS 5529 (COND C), ASTM A693, MIL-S25043
Descriptio
Typus 17-7PH® Praecipitatio Hardening Alloy est ferrum semi-austeniticum immaculatum, quod austeniticum est in conditione annata, at martensiticum in conditione obdurata.Typus 17-7PH® altam fortitudinem et duritiem praebet, proprietates lassitudines excellentes, bonam corrosionem resistentiam, et minimam corruptelam in curatione caloris.Facile formatur in annealed conditione, tum ad altas vires obduratur per simplices curationes caloris ad Conditiones RH 950 et TH 1050. Magna vis conditionis CH 900 multa commoda praebet, ubi limitata ductilitas et operabilitas licita sunt.Hoc mixtura in calore tractata eximias proprietates mechanicas temperaturis usque ad 900 °F praebet (482°C).
CHIMIE TYPICAL
Carbon: 0.090 max
Manganese: 1.00 max
Pii: 1.00 max
Chromium: 16.00- 18.00
Nickel: 6.50- 7.75
Aluminium: 0.75-1.50
Phosphorus: 0.040 max
Sulphur: 0.030 max
Ferrum: Libra
PHYSICA POTESTAS
Densitas: (Cond. A): 0.282 lbs/in3 7.80 g/cm3
Resistivity electrica: (microhm-cm) (omnes conditiones): 60 °F (20°C): 80
Scelerisque Conductivity: BTU/hr/ft2/ft/°F (W/m•K)
A 300 °F .
Medium Coefficiens Expansionis Thermalis: in/inl°F (µm/m•K): (Cond. A);
70 °F (21 -93 °C): 8.5 x 10-5 (15.3)
70 -400 °F (21 -204 °F): 9.0 x 10-5 (16.2)
70 °F (21 -315 °C): 9.5 x 10-5 (17.1)
70 -800 °F (21 -427 °C): 9.6 x 1 o-6 (16.0)
Modulus Elasticitatis: ksi (MPa)
29 x 103 (200 x 103) in contentionibus
Magnetic Permeability:
Annealed: Debiliter ferromagneticum
Aestus tractavit: Fortiter ferromagneticum
FORMAE
Exue Coil
- 17-7PH Steel Strip
- 17-7PH Steel Foil
- 17-7PH Steel Ribbon
Wire Products
- 17-7PH Steel Shaped Wire & Profile Wire
- 17-7PH Steel circa filum
- 17-7PH Steel Flat Wire
- 17-7PH Steel Square Wire
Euismod
Processing Mechanical Properties At Room Temperature
Cange dolor: <.010 pollices
Ultima Tensile Fortitudo: 150 KSI max (1035 MPa max)
Cede fortitudo (0.2% offset): 65 KSI max (450 MPa max)
Prolongatio: Consule Ulbrich Technical Services
Cange dolor:> pollices .010
Ultima Tensile Fortitudo: 150 KSI max (1035 MPa max)
Cedant robur (0.2% offset): 55 KSI max (380 MPa max)
Prolongatio: 20% min
Duritia: Rb 92 max
Typical Condition C
Ultima Tensile Fortitudo: 200 KSI min (1380 MPa min)
Cedant vires (0.2% offset): 175 KSI min (1205 min MPa)
Prolongatio: 1% min
Hardness: Re 41 min.
ADDITAMENTA ADVERSUS TEMPERS:
Ulbrich Services technicae consule si alias quam Conditiones C temperamenta requiruntur.
TRACTATIO DE CAELO 17-7PH STEEL
TH ML Typical
Ultima Tensile Strength: 180 KSI min (1240 MPa min)
Cede Virtus: (0.2% Offset) 150 KSI min (1034 MPa min)
Prolongatio: Consule Ulbrich Technical Services
Duritia: Re 38 min
RH950 Typical
Ultima Tensile Strength: 210 KSI min (1450 MPa min)
Cede Virtus: (0.2 Offset) 190 KSI min (1310 min MPa)
Prolongatio: Consule Ulbrich Technical Services
Duritia: Re 44 min
CH900 Typical
Ultima Tensile Strength: 240 KSI min (1655 MPa min)
Cede Virtus: (0.2% Offset) 230 KSI min (1586 MPa min)
Prolongatio: 1% min
Durities: Re 46 min(iendum);
ADDITAMENTA
CORROSION resistentia 17-7PH FERRUM
Refer ad NACE (Consociatio Nationum Corrosionis Engineers) pro commendatione.
